DOOR STRUCTURE:

• Curtain slats are made of galvanised steel (thickness: 0,8 mm) and are filled in with mineral wool (thickness: 60 mm),
• Door tracks are made of galvanised steel and equipped with special double-sided sealing strips,
• The lower edge of the door is finished with a soundproof rubber profile where a photocell may be installed, serving as a finger trap protection when closing the door,
• The door motor is a fully operational industrial motor guaranteed for 100 000 operating cycles, ensuring effortless opening and closing of the door,
• The door is supplied with a control unit and wiring,
• In the optional roller version (RGS), it may be equipped with a roller shutter box.

DOOR STRUCTURE:

The OGS door consists of interconnected horizontal slats. The slats may be 400 to 700 mm high; the outer surface of the door is covered with galvanised sheet steel, glued to the entire door surface, making the door panel look sleek and smooth. The functionality of the door is increased by the required door lintel – only 750 to 850 mm.

The door is available in one of the three types of track systems:

• Standard horizontal lift track – requires about 800 mm lintel;
• High lift track – used if the lintel is higher;
• Vertical lift track – used if the door should be opened vertically.

The door is equipped with an electric motor with a control unit; allowing operation of the door in a normal mode and at the same time guarantees the automatic closing of the door in case of fire alarm.

In the standard version the door is controlled by up-stop-down buttons on the control unit. At customer’s request, doors may be equipped with a finger trap protection placed on the lower edge of the door. This type of safety device may be used with remote door control, e.g. a remote control, opening radar, etc.

In the standard version, the outer surface of the door is secured with high-quality galvanised coating. At customer’s request, doors may be painted in one of the four standard RAL colours (7035, 9002, 9006, 9010), in any RAL colour or made of stainless (acid-resistant) steel;

OGS DOOR CONTROL:

SI motor with FSTronic DES-FI control

• Industrial motor with long cycle life up to 100,000 cycles;
• 1×230 V/20 A supply;
• In case of an alarm, the door is closed by means of a battery;
• Possibility of emergency manual opening of the door using a crank or chain;
• The battery can be enlarged to enable electrical safety opening the door without an external power source.

DOOR STRUCTURE:

• The door consists of individual slats based on the steel frame structure. Slats are covered with a flame-retardant material and metal sheet;
• Stability of the of door leaf is achieved by strengthening the steel panels with the profiles connected with threaded rods;
• The assembled door leaf is equipped with two roller carriages and is suspended in the door track on steel cables with rupture protection;
• Doors are available in a smoke control or an Ex version;
• Guaranteed mechanical strength of the door: 50 000 operating cycles;

AVAILABLE SURFACE FINISH:

• Standard – high-quality galvanised coating;
• Painted in one of the four standard RAL colours (7035, 9002, 9006, 9010);
• Stainless (acid-resistant) steel;
• Doors may also be finished with MDF, PVC, HDF, solid surface veneer or natural wood veneer according to customer’s choice;

CONTROL UNITS:

The fire panel Slidetronic (Door without electric drive):

• 230 V/6 A supply;
• Serves for controlling an electromagnetic brake or electromagnet;
• It can receive signals from controlling devices and send signals to the controlled devices;
• Optional installation of a 24 V reserve battery, preventing immediate closing of a door leaf under normal operation in the event of a standard power outage;
• Can be connected to an autonomous detection system (detectors) and the signals from the central EPS;
• Integrated “START-STOP” button.

Download

DOOR STRUCTURE:

• The door consists of individual slats based on the steel frame structure. Slats are covered with a flame-retardant material and metal sheet;
• Stability of the of door leaf is achieved by strengthening the panels with the steel profiles connected with threaded rods;
• Slats are suspended on a guide track; each slat has a separate roller carriage;
• Doors can be closed by means of a counterweight or gravity;
• Guaranteed mechanical resistance of the door: 50 000 operating cycles (for electrically operated doors).

AVAILABLE SURFACE FINISH:

• Standard – galvanized surface;
• Painted in one of the four standard RAL colours (7035, 9002, 9006, .. 9010);
• Painted in any RAL colour;
• Made of stainless (acid-resistant) steel;
• Doors may also be finished with MDF, PVC, HDF, solid surface veneer or natural wood veneer according to customer’s choice.

TYPES OF DOORS:

• Single-leaf (optionally smoke proof)- the door leaf forms a whole/ consists of one part. An individual leaf sliding left or right;
• Double-leaf optionally smoke proof)- The door leaf is divided into two parts (symmetrical or asymmetrical). two individual leaves sliding to either side of the opening;
• Telescopic – each leaf consists of 2–3 sections that telescopically slide one behind the other to the left or to the right. Thanks to this solution, the amount of space required to set the door in open position can be reduced.

SGS DOOR CONTROL:

Electromagnetic brake (for door leaf of surface area above 4 square meters). Has the option of setting a constant speed of door closure and stoppage at any position, in case of manual door operation in a non-alarm mode

Electromagnet brake (for door leaf of surface area up to 4 square meters). – no possibility to regulate closing speed, the door leaf can only be stopped in the end positions – open or closed

MASTER electric motor with a control and fire unit:

• Control unit ensures door opening and closing with motor;
• The system contains control buttons on either side of the door;
• Door opening is secured by an one-way photodetector ;
• In case of an alarm the door is closed by a motor supplied with emergency power supply (UPS) located at the control unit;
• Optional remote control of the door;

Download

TECHNICAL SPECIFICATION:

• The door is made on the basis of rolling shutters RGS;
• Lamella height 150 mm, thickness 60 mm;
• Insulated slats (thermal transmittance is (1.1 W / m2K);
• Combination of panels eliminates the thermal bridge;
• Possibility of mounting at a very low lintel 450 mm;
• Easy assembly and disassembly of the door blade;
• Individual adjustment of the track system to the building conditions (eg. The angle of the roof);
• Certified sound reduction (up to 55dB);
• Guaranteed mechanical strength of the door for 50,000 cycles.

DOOR CONTROL:

SI motor FSTronic DES-FI control:

• Industrial motor with long cycle life up to 100,000 cycles;
• 1×230 V/20 A supply;
• Close the door of the batteries in case of alarm;
• Possibility of emergency manual opening of the door using a crank or chain;
• Possibility of manual opening of the door;
• The battery can be enlarged to enable electrical safety opening the door without an external power source.